Nyx Clear Top Pouch PDF Pattern
On Sale
$9.00
$9.00
NOTE: THIS IS A PDF PATTERN, YOU WILL RECIEVE NO PHYSICAL PRODUCT.
Nyx is a pouch full of possibilities! This pattern offers two sizes and two versions. Make a regular or large sized pouch, great for holding school or sewing supplies, or make a console case for either size of a certain favorite game system with space for your game cartridges.
This bag includes a combination of binding and turning for the lining. Binding is kept minimal, making it a good introduction to the method.
Skill Level: Adventurous Beginner
Approximate Measurements: Regular: 9” W x 4” H x 2” D Large: 10 ½” W x 5” H x 2” D
Fabric and Interfacing
• ½ yd Exterior Fabric
• ½ yd Lining Fabric
• 8” x 11” Transparent or Clear Printed Vinyl* (12 - 20 gauge)
• FQ Bias Tape Fabric OR 1 ¼ yd Pre-made bias tape
• 1 yd 20” Woven Fusible Interfacing **
• 1 yd Sew In Foam Stabilizer
• 6” Square Firm Fusible Stabilizer (Peltex or Decovil Light)
• 6” Square Fusible Fleece
*Vinyl requirement based on non-directional vinyl print. More may be needed depending on chosen vinyl print. The heavier gauge the vinyl, the stiffer it will be to work with.
**This assumes Pellon SF101 is used. Less woven interfacing will be needed if a wider interfacing is used or if material such as faux leather/vinyl is used for the exterior
Hardware and Notions
• (15”) 1” Wide Elastic (Game Pouch ver. only)
• 1 Set Plastic or Spring Snap (Game Pouch ver. only)
• 24” #5 Continuous Zipper Tape w/ 2 slides OR 24” #5 Double Head Zipper (Will be cut down)
• Matching Thread
• Marking Pen
• Sewing Pins/Clips
• Fabric Shears
• Iron
• Seam Ripper
• Sewing Machine
• Rotary Cutter
• Acrylic Ruler
• 18mm Bias Tape Maker (OPTIONAL)
Nyx is a pouch full of possibilities! This pattern offers two sizes and two versions. Make a regular or large sized pouch, great for holding school or sewing supplies, or make a console case for either size of a certain favorite game system with space for your game cartridges.
This bag includes a combination of binding and turning for the lining. Binding is kept minimal, making it a good introduction to the method.
Skill Level: Adventurous Beginner
Approximate Measurements: Regular: 9” W x 4” H x 2” D Large: 10 ½” W x 5” H x 2” D
Fabric and Interfacing
• ½ yd Exterior Fabric
• ½ yd Lining Fabric
• 8” x 11” Transparent or Clear Printed Vinyl* (12 - 20 gauge)
• FQ Bias Tape Fabric OR 1 ¼ yd Pre-made bias tape
• 1 yd 20” Woven Fusible Interfacing **
• 1 yd Sew In Foam Stabilizer
• 6” Square Firm Fusible Stabilizer (Peltex or Decovil Light)
• 6” Square Fusible Fleece
*Vinyl requirement based on non-directional vinyl print. More may be needed depending on chosen vinyl print. The heavier gauge the vinyl, the stiffer it will be to work with.
**This assumes Pellon SF101 is used. Less woven interfacing will be needed if a wider interfacing is used or if material such as faux leather/vinyl is used for the exterior
Hardware and Notions
• (15”) 1” Wide Elastic (Game Pouch ver. only)
• 1 Set Plastic or Spring Snap (Game Pouch ver. only)
• 24” #5 Continuous Zipper Tape w/ 2 slides OR 24” #5 Double Head Zipper (Will be cut down)
• Matching Thread
• Marking Pen
• Sewing Pins/Clips
• Fabric Shears
• Iron
• Seam Ripper
• Sewing Machine
• Rotary Cutter
• Acrylic Ruler
• 18mm Bias Tape Maker (OPTIONAL)